- Introduction:
During this lab session, we have learn how to use schlenk tubes and measure pressure using logger pro.Each team used one compound. Our group used C5H10O2 also known as propyl acetate. We performed this experiment in order to see how did intermolecular forces(Van der Waals, permanent dipole-dipole forces and hydrogen bonding) affect the boiling point and vapour pressure of a substance.
- Materials:
Schlenk Tube
We've used a schlenk tube in this lab session to create a vacuum.
|
Thermometer
We've used the thermometer for measure the temperature in celsius of the water that heated up the schlenk tube.
|
Water Bath
We've used a water bath in the experiment to heat up the schlenk tube.
|
Bunsen Burner
We used a bunsen burner to heat up more water.
|
In this lab session we have used a bunsen burner to heat up water
Tripod
We used a tripod to hold the container in which water was being heated up
|
- Our chemical compound:
Propyl Acetate
Formula: C5H10O2
Molecular mass: 102.13 g mol−1
- Our results:
Graph showing how vapour pressure changes over temperature.
|
In this graph we can see how temperature affects the vapour pressure. The numbers that are in squares, are the temperature in celsius (ºC). I have put it like that because Logger Pro only records pressure and time. The vapour pressure got higher as we increased the temperature. This is because for a liquid to evaporate, needs energy so that particles start to move fast and separate from the others. Heat is a form of energy. In the second graph we can see Maxwell-Boltzmann curve which shows that in a liquid with a specific amount of particles, there is going to be a little amount of particles that will have the amount of energy needed in order to evaporate, but there will be a higher amount of particles that will not have the energy needed. In this graph, we can see how the line changes with temperature: at -173.5ºC, at 226ºC and finally at 726 ºC in which we can see that almost all the particles have the energy needed. 
This experiment is far away from being perfect. First of all, there was a misunderstanding between groups because we measured vapour pressure at different temperatures. Also, as we didn't have a water heater for each group, when we went from a heater to another, the pressure dropped down especially when one heater was far from the next heater.
- Class results:
Group
|
Chemical
|
Formula
|
Boiling Point (ºC)
|
Temperature and Vapour pressure (ºC and kPa)
|
1
|
Butyl Acetate
|
C6H12O2
|
20.0
|
0= 35.3 15= 32.3
20=29.4 40=26.7
|
2
|
Diethyl Ether
|
(C2H5)2C
|
34.6
|
20=38.2 25= 44.3
30=64.5 35= 102.2
|
3
|
Propyl Acetate
|
C5H10O2
|
102.0
|
0=4.3 15=7.8
20=9.2 40=10.1
|
4
|
Ethyl Acetate
|
C4H8O2
|
77.1
|
0=9.5 15=12.2
25=14.4 40=20.1
|
5
|
2-Propanol
|
C3H8O
|
82.5
|
0= 0.5 15= 1.8
20= 3.5 40= 9.8
|
6
|
Propyl Acetate
|
C5H10O2
|
102.0
|
0= 78.9 15= 96.1
20=100.9 40=111.3
|
7
|
Pentane
|
C5H12
|
309.2
|
0= 71.4 15= 98.6
25=101.9 35=104.9
|
8
|
Methyl Acetate
|
C3H6O2
|
56.9
|
0= 8.9 15=9.4
25=20.6 35=21.9
|
In the graph, we can see how does the intermolecular forces affect the vapour pressure of a compound. Intermolecular forces, sticks the particles of a compound stronger, making it difficult to split them up. The weakest intermolecular force is Van der Waals force, which is spontaneously so that is why it is the weakest. The second intermolecular force is the permanent dipole-dipole force which is found in those molecules which are formed by atoms that have a high electronegativity difference. For example hydrogen and oxygen. Finally, the strongest force is the hydrogen bonding which occurs when Hydrogen bonds with either nitrogen, oxygen and fluorine.
In order to read this graph you need to know that the longer the bar is weakest the molecule is because it is easier to break its particles.
2-Propanol, has the lowest vapour pressure because it has the three forces: Hydrogen bond because it has hydrogen joined with oxygen, permanent dipole-dipole because oxygen and hydrogen have a big electronegativity difference, and also is a big particle which enables having a stronger Van der Waals force. We can also see that the two molecules with high vapour pressure are the ones that are small molecules and only have Van der Waals forces because carbon and oxygen have a little electronegativity difference 0.3.
- References:
Chemspider.com. (2014). Propyl acetate | c5h10o2 | chemspider. [online] Retrieved from: http://www.chemspider.com/Chemical-Structure.7706.html [Accessed: 14 Mar 2014].
Chemicalbook.com. (1980). Butyl acetate | 123-86-4. [online] Retrieved from: http://www.chemicalbook.com/ChemicalProductProperty_EN_CB6671615.htm [Accessed: 14 Mar 2014].
SUmmative:
ReplyDeleteB - 5 Well explained results and information. You could have explained a little more in terms of each chemical and its boiling point.
E - 6 Excellently processed data and presentation in the form of graphs.