Friday, February 28, 2014

Solutions lab session

Solutions lab session
During this session you will visit a number of areas of knowledge that you have used before – precision measurements, properties of substances, molarity, molality. You will also be introduced to ideas such as the conservation of mass and additive/non-additive volumes. As you will be measuring a number of different masses, you should try to use the same set of scales for each measurement.

Firstly, complete the blank spaces in the questions below. I have provided enough information to complete all answers.
Secondly, make a blog page for this practical that uses the information to discuss the following points (explain and give examples to support your discussion):

  • Is mass always conserved?
Yes, because as law of conservation of mass states, mass can form to another but can't never be lost. "Matter can be changed fromone form into another, mixtures can be separed or made, and pure subtances can be decomposed, but the total amount of mass remains constant" (Chem.wisc.edu, 2014)
  • Is volume always conserved?
Although mass is always conserve there are other properties such as volume which are not. Volume can approximately be conserved in solutions with constant density in their fluids, however, everything is compressible and changes density with temprature change. (Lohninger, H, 2014)
In our experiment we added salt into water, in this case, volume wasn't conserved. As the initial volume of water in the measuring cylinder was 10mL; we added 2.5g of NaCl.
However, the final volume was 11.5mL.

  • What are molality and molarity?
Molality (m) is the concentration of a subtance in a solution, expressed as the number of moles of solute per kilogram of solvent, this means that molality is the amount of subtance of solute divided bt the mass in kg of solvent.  (Boundless.com, 2014)

Molarity (M)  is the concentration of a subtance in solution, expressed as the number of moles of solute per litre of solution, this means that molarity of a solution is the amount of moles of the solute divided by the volume in liters of solvent. (Boundless.com, 2014)


1. Working out the volume of 2.5 g sodium chloride using cyclohexane.
a.     Measure 3 mL of cyclohexane with a pipette and pour it into a dry measuring cylinder.

Weigh the cylinder with the cyclohexane:       ___73.50g__.
Weigh 2.50 g of sodium chloride and place it in the cylinder as well. 
Weigh the whole apparatus:            ___76.00g_.
Does the total mass equal the masses of the different parts?   Yes (73.5 + 2.5= 76g).
A French scientist named Lavoisier stated that “matter cannot be created or destroyed, so mass is always conserved”. 
Does your data agree (approximately) with this statement?
According to the data, yes because the masses of the different parts is equal to the whole apparatus’ mass.

b.    Why does sodium chloride not dissolve in cyclohexane (Hint: which kind of substance are they – ionic, covalent (organic) or metallic)?
Because NaCl is an ionic and they cannot bond with organics.

As it does not dissolve, we can work out the volume of the salt by measuring the change in volume of the mixture:
What was the initial volume of cyclohexane?               3mL     .
What is the final volume (after adding the salt)?              __4.5mL_.
What is the volume of the sodium chloride?        ___1.5mL__.

2. Is mass conserved when 2.5 g of salt is dissolved in water?
Weigh a clean, dry 25 mL measuring cylinder:                        __70.00g_.
Take 10 mL of water with a pipette and pour it in the cylinder.
Weigh it again, now with the water:                                       __80.00g_.
What is the mass of the water?                                                 __10g__.
What should the mass of water be per gram? (use the internet)__1g/mL__.
Weigh 2.50 g of sodium chloride. Add it to the water and dissolve it.
Weigh the whole apparatus:                                                    __82.50g_.
Does the total mass equal the masses of the different parts?    __Yes__
Is mass conserved?                                                                      __Yes_.
What is the final volume of the solution?                                  _11.0mL__.

3. Is volume ´additive´ (can we just add the individual volumes to get the final volume) when 2.5 g sodium chloride is dissolved in water?
What was the initial volume of water in part 2?                      __10mL_.
What volume should be taken up by the salt solution?           __12.5mL__.
What is the actual final volume of your sodium chloride solution?  ___11mL_.

Is there a difference between your answer and what you predicted? Explain why there is or might be:
Yes, we think this happens when NaCl is dissolved in water because NaCl is an ionic and compounds and water a covalent one, so they might be a chemical reaction or physic force that decreases the final volume.

 4. Work out the molarity and molality of the sodium chloride solution:
Molarity, M (mol/L) = number of moles of solute ÷ volume of solution (L)
Calculate the molarity of your sodium chloride solution (in water):

23+35,5= 58,5
2,5/58,5= 0,042735
0,042735/11= 0,003885 mol/L

Molality, m (mol/kg) = number of moles ÷ mass of solvent (kg)
Calculate the molality of your sodium chloride solution (in water)

0,042735/0,01= 4,2735 mol/kg


  1. Bonus questions
·         Why is it suggested to use the same set of scales for each measurement?
Because different scales could measure the thing slightly different, and in this experiment we want to be as precise as possible

·         Briefly design a different experiment that could be used to investigate additive volumes.
Carry out the same experiment with ethanol and water. They won’t have additive volumes because of the bonding which takes place between the two liquids. They may have attraction or distraction so the volume occupied can be either bigger or smaller than adding their volume mathematically.

·         What are “colligative properties”?
Colligative properties only depend on the concentration of the solute and not on the nature of the molecules.
_________________________________________________________________________________

Bibliography


Boundless.com. 2014. Definition of molality - Chemistry. [online] Available at: https://www.boundless.com/chemistry/definition/molality/ [Accessed: 14 Mar 2014].

Boundless.com. 2014. Definition of molarity - Chemistry. [online] Available at: https://www.boundless.com/chemistry/definition/molarity/ [Accessed: 14 Mar 2014].


Chembuddy.com. 2014. Concentration lectures - volume-volume percentage. [online] Available at: http://www.chembuddy.com/?left=concentration&right=volume-volume-percentage [Accessed: 28 Feb 2014].
Chemistryexplained.com. 2014. Colligative Properties - Chemistry Encyclopedia - water, uses, examples, gas, number, equation, salt, property. [online] Available at: http://www.chemistryexplained.com/Ce-Co/Colligative-Properties.html [Accessed: 28 Feb 2014].
Chem.wisc.edu. 2014. [online] Available at: http://www.chem.wisc.edu/deptfiles/genchem/sstutorial/Text1/Tx14/tx14.html [Accessed: 14 Mar 2014].
Lohninger, H. 2014. Volume Relationships in Chemical Reactions. [online] Available at: http://www.vias.org/genchem/atommasses_12431_03.html [Accessed: 14 Mar 2014].